Alexa commands when using the Bond Home application

These are all the supported Alexa voice commands for devices programmed to the Bond Bridge, DekorKonnect Outdoor Lighting, and Smart by Bond Fans. 

Please make sure to link your Bond device to Alexa integration for the commands to work. If you haven't linked your Bond device to Alexa, you may follow the instructions found in this article first (Setting up and Using Amazon Echo) before trying to control your devices using voice commands.

It is also important to note that your Bond devices will only respond to voice commands when you can control them using the Bond home application and when the Bond is online or connected to the Bond server.

VOICE COMMANDS

Bond Bridge / Bond Bridge Pro Outdoor Lighting Smart by Bond

• For Ceiling Fan

"Turn On/Off (Device Name)"

"Set (device name) to speed #"

"Set (device name) to low/medium/high"

"Set (device name) speed to (beaufort scale)"

"Set (device name) to 0-100 percent"

"Set (device name) to Summer"

"Set (device name) to Winter"

***Note - use the chart below to convert the low, medium and high commands to the equivalent ceiling fan speed.

If there is an issue with Alexa correctly interrupting the fan speed, please try using the Beaufort name from the information below.

On a 6 speed fan you would say "Alexa, set ceiling fan to Hurricane Force" to set the fan to speed 6.

• For Ceiling Fan Light

"Alexa, turn on/off (device name) light"

Brightness Control

If the Alexa application only shows the on/off icon there is no dimming/brightness control.


If the Alexa application shows on/off and a slider, you can set the brightness by moving the slider or using the voice commands below.


"Alexa, turn on/off <device name> light"
"Alexa, increase <device name> light"
"Alexa, increase <device name> light brightness"
"Alexa, decrease <device name> light"
"Alexa, increase <device name> light by 10%"
"Alexa, decrease <device name> light by 90%"

If the Ceiling Fan has Up and Down Lights

• “Alexa, Turn on/off <device name> light” – for down light
• “Alexa, Turn on/off <device name>up light” – for up light

• For Motorized Shades and Blinds

"Alexa, Open/Close <device name>"

"Alexa, Set <device name> to favorite position" or "Set <device name> to preset mode"

• For Fireplace

"Alexa, turn on/off <device name>"

“Alexa, set <device name> to 50%”*

“Alexa, increase/decrease <device name>”*

“Alexa, increase/decrease <device name> by 20%”*

If Fireplace has Brightness Control - slider for the fireplace

"Alexa, increase <device name> light"
"Alexa, increase <device name> light brightness"
"Alexa, decrease <device name> light"
"Alexa, increase <device name> light by 10%"
"Alexa, decrease <device name> light by 90%"

*Flame control support. You will see a slider in the Alexa integration if flame control is supported.

• For any other Generic Device type (last item in the Device type listing)

"Alexa, turn on/off <device name>"

If the Alexa application shows on/off and a slider, you can set brightness by moving the slider or using the voice commands below.



"Alexa, turn on/off (device name)"
"Alexa, increase (device name)"
"Alexa, decrease (device name)"
"Alexa, increase (device name) by 10%"
"Alexa, decrease (device name) by 90%"

• For Fan Control

"Turn On/Off (Device Name)"

"Set (device name) to speed #"

"Set (device name) to low/medium/high"

"Set (device name) speed to (beaufort scale)"

"Set (device name) to 0-100 percent"

"Set (device name) to Summer"

"Set (device name) to Winter"

• For Light Control

"Turn On/Off (Device Name) Light"

"Set (device name)light to %"