(Bond Bridge & Pro) Green WiFi reset

New Connection

This reset is used when you want to connect the Bond Bridge unit to a different WiFi network or change the associated Bond home account without deleting your devices.  This reset is also used if you were not able to connect to your wifi network (orange center ring) and need to start the connection process again.

Bond Bridge
		Use a small pointy object such as a toothpick to press and hold the reset switch located in a small hole next to the USB cable connector. Hold it down until the ring turns green (about 5 seconds) and then release.  Please release by 8 seconds to avoid a factory reset The ring will blink white for several seconds and finally return to a flashing green. Open the Bond home application and select the + sign to add a new BOND.  None of your current device settings will be changed or removed. If your Bond device has a QR code on the bottom Select SCAN QR CODE, if not select Bridge Pro or Bridge. Follow the BOND setup instructions.
Bond Bridge Pro
		Use a small pointy object such as a toothpick to press and hold the reset switch located in a small hole next to the USB cable connector. Hold it down until the ring turns green (about 5 seconds) and then release.  The ring will blink white for several seconds and finally return to a flashing green. Please release by 8 seconds to avoid a factory reset Open the Bond home application and select the + sign to add a new BOND.  None of your current device settings associated to the Bond Bridge Pro will be changed or removed. If your Bond device has a QR code on the bottom Select SCAN QR CODE, if not select Bridge Pro or Bridge. Follow the application setup instructions.

Already Connected

If you are already connected to a WiFi network and want to change to another one, please follow the procedure in the link below.  This will not remove any devices stored on your Bond.

Changing WiFi connection in the Bond Home application