Before removing a shade device programed into a Bond Bridge device, you should unpair it from the shade first. Following this process will remove the Bond Bridge from the items paired to the motor allowing you to add other pairings in the future to the shade motor.
Unpairing Shade Device
- Open the Bond Home application.
- Select the Shade you are going to remove.
- Select the Menu at the top right.
- Select Settings.
- Select Advanced.
- Select Pair/Unpair device
- If your shade does not support unpairing, this option will not be available and you can skip the rest of the steps below.
- Press the pairing / programming button on the remote.
- Frequently this is on the back of the remote or in the battery compartment.
- Select Yes after the Shade jogs (moves up and down).
- Select Pair/Unpair.
- Select Yes after the shades jog.
- Select Done.
Removing Shade Device
***Make sure you have completed the Unpairing process above first.***
- Open the Bond Home application.
- Select the Shade you are going to remove.
- Select the Menu at the top right.
- Select Settings.
- Select the Menu at the top right.
- Select Remove Device.
- Select Remove.
Comments
Article is closed for comments.