(Outdoor Lighting) Set up

  1. Connect the Hardware
    1. Follow the manufacturer manual for installing the hardware.
  2. Open the Bond Home Application. If you do not have the application yet, download the Bond Home Application ​ from your device's App Store/Play Store.
  3. If you already have a Bond account, simply log in and continue to the next step. If you do not have a Bond account press “Create account” and enter your name, email, and password.
  4. Select to add a device
    mceclip0.png
  5. Select Smart by Bond
  6. Connect to your Bond Config Wifi that starts with "T".
    mceclip1.png
  7. Once the Bond Application connects to your light, select CONTINUE.
    mceclip0.png
  8. Test your device by tapping on the light bulb icon.
       - If your light responds, select YES, IT WORKS!
    mceclip1.png
  9. Specific Information about your Outdoor Lights.
    1. Select Location and choose from one of the predefined entries or add your own by selecting OTHER. When finished select Save.
    2. Select Device Name and enter the name for your device. When finished, select OK to save.
      1. Please note that this name will be used for integrations so a simple easy to remember name is best.
  10. Select CONTINUE
    mceclip2.png
  11. Select the WiFi network you would like to connect with.
  12. Enter the WiFi password and select OK.
  13. If there is an issue with the connection, wrong password entered. You will receive an error message. Please select OK, I’ve Got it.
    1. Start the setup process again by choosing +.
    2. You will start at step 8 to confirm the application controls the light.
  14. Once the connection is made, please select DONE.
  15. If the device is not displayed in the BOND application, please swipe down to refresh.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.