(Bond Bridge) - ID showing as a WiFi network

Your Bond serial number will show up as a Wifi network when you are setting it up, or have done the WiFi reset.  If you are not setting up your Bond device or activated the WiFi (green) reset you should not see it in the list of WiFi networks.

Please power the Bond Bridge off by unplugging the USB cable from the Bond Bridge for 30 seconds.  Restore power by plugging the USB cable back into the Bond Bridge.  When the Bond Bridge center ring turns solid blue, wait about 1 minute and confirm that the Bond is not listed as a WiFi network.

If your Bond serial number is still showing up as a Wifi network, please reach out to customer service through the application in the settings menu or send an email to customerservice@olibra.io.


Was this article helpful?
2 out of 2 found this helpful
Have more questions? Submit a request



Article is closed for comments.