Bond Bridge - Checking and Updating Firmware using the Bond Home application

Checking Firmware

  • Select your Bond Bridge.
    mceclip3.png
  • The current Firmware version is displayed.
    mceclip4.png
  • Select Firmware Update.
  • If there are no updates available, you will see the screen below.
    mceclip5.png
  • If there is an update, you will see the screen below.  Selecting Update will update the Bond Bridge firmware.
    mceclip6.png

Updating Firmware

  • If the Bond Bridge has an update for the firmware, you will see a notification on the main screen for the Bond Bridge.
  • Select your Bond Bridge.

mceclip1.png 

  • You will see an indicator for Firmware Update when there is updated firmware for your Bond Bridge.  Select Firmware Update.

mceclip7.png

  • You will see the current version plus the latest version available.  Select Update.

mceclip6.png

  • Once the Firmware update completes, the settings display will show it.  You may have to go back from the settings screen and back into it to show the updated version.

mceclip8.png

  • The Firmware update is complete.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.