(Bond Bridge & Pro) Checking and Updating Firmware using the Bond Home application

Checking Firmware

  • Select your Bond Bridge.
    mceclip3.png   mceclip1.png
  • Firmware Update shows the current version.
  • Select Firmware Update.
  • If there are no updates available, you will see the screen below.
  • If there is an update, you will see the screen below.  Selecting Update will update the Bond Bridge firmware.

Updating Firmware

  • If the Bond Bridge has an update for the firmware, you will see a notification on the main screen for the Bond Bridge.
  • Select your Bond Bridge.

mceclip1.png  mceclip0.png

  • You will see an indicator for Firmware Update when there is updated firmware for your Bond Bridge.  Select Firmware Update.


  • You will see the current version plus the latest version available.  Select Update.


  • Once the Firmware update completes, the settings display will show it.  You may have to go back from the settings screen and back into it to show the updated version.


  • The Firmware update is complete.
Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request



Article is closed for comments.