(Bond Bridge) - Google commands when using the Bond Home application

These are all the supported Google voice commands for devices programmed to the Bond Bridge, DekorKonnect Outdoor Lighting, and Smart by Bond Fans. 

Please make sure to link your Bond device to Google integration for the commands to work. If you haven't linked your Bond device to Google, you may follow the instructions found in this article first (Setting up and Using Google Home) before trying to control your devices using voice commands.

It is also important to note that your Bond devices will only respond to voice commands when you can control them using the Bond home application and when the Bond is online or connected to the Bond server.

VOICE COMMANDS

Bond Bridge / Bond Bridge Pro Outdoor Lighting Smart by Bond
  • For Ceiling Fan
  • "Turn on/off <device name>"
  • "Set <device name> to speed #"
  • "Set <device name> to low/medium/high"
  • "Set <device name> speed to <beaufort scale>"
  • "Set <device name> to 0-100 percent"
  • "Increase <device name>"
  • "Increase <device name> speed"
  • "Decrease <device name>"
  • "Decrease <device name> speed"
  • "Increase <device name> by 15%"
  • "Decrease <device name> by 50%"
  • For Ceiling Fan Light
  • "Turn on/off <device name> light"
  •  If the Google Home / assistant application only shows the on/off icon there is no dimming/brightness control.
  • Brightness control
    If Google Home / assistant shows on/off and an adjustable slider, you can set brightness by adjusting the slider or using the voice commands below.
    • "Increase <device name> light"
    • "Increase <device name> light brightness"
    • "Decrease <device name> light"
    • “Increase <device name> light by 10%"
    • "Decrease <device name> light by 90%"

mceclip1.png

If Ceiling fan has up and down lights

  • “Turn on/off <device name> light” – for down light
  • “Turn on/off <device name> up light” – for up light
  • For For motorized shades and Blinds
  • "Open/Close"
  • Set (device name) to 50%
  • "Set (device name) to preset"

Note The slider for Google operates based on the amount of light entering verses the Bond Home application of light being blocked.  You will need to pull up on the slider to increase the amount the shade is open for Google.

Bond Home application

Google Home application

  • For Fireplace
"Turn on/off <device name>"
“Set <device name> to 50%”*
“Increase/decrease <device name>”*
“Increase/decrease <device name> by 20%”*
If Fireplace has Brightness Control - slider for the fireplace
  • "Turn on/off <device name> light" (if fireplace has light)
  • If Fireplace light has Brightness control
    • If Google Home / assistant application shows on/off and a slider as in the examples below, you can set brightness by adjusting the slider or using voice commands.

mceclip2.png

  • "Increase <device name> light"
  • "Increase <device name> light brightness"
  • "Decrease <device name> light"
  • "Increase <device name> light by 10%"
  • "Decrease <device name> light by 90%"

*Flame control support You will see a brightness control in the Google Home / assistant integration if flame control is supported.

mceclip3.png

  • For any other Generic Device type (last item in the Device type listing)
"Turn on/off <device name>"
Was this article helpful?
3 out of 3 found this helpful
Have more questions? Submit a request

Comments

0 comments

Article is closed for comments.