Using IFTTT with BOND

Video for using IFTTT with the BOND

IFTTT Instructions 

(a) Setup Account 

  • Go to https://ifttt.com/
  • Click in Sign up
  • Choose if you wanted to use your Google or Facebook account. If you choose this option, click on sign up.
  • If you choose to use an email address enter your email address and your desired password
  • Click on Sign up Button

(b) Link BOND using an IFTTT account  

  • Go to https://ifttt.com/
  • Click on the Search button
  • Type in BOND on the search bar
  • Click on BOND under the services section
  • Click Connect
  • Authorize IFTTT if asked to

(c) using BOND as THAT (examples are using date and time)

(1) Run Percentage 

  • Click on your account in the upper right hand section of the page. 
  • Click on "+this" (Colored blue in the phrase "if this then that")
  • Look for "Date & Time" and select it.
  • Click on "+that" (Colored blue in the phrase "if this then that")
  • Look for "BOND" and select it.
  • Select "Run percentage action".
  • Select the device with the corresponding percentage action. (Set / increase / Decrease)
  • Choose percentage rating.
  • Click on Create action.

(2) Turning on Device in IFTTT 

  • Click on your account in the upper right hand section of the page. 
  • Click on "+this" (Colored blue in the phrase "if this then that")
  • Look for "Date & Time" and select it.
  • Fill in the desired time and duration (00 Minutes if no timer), Click on create trigger.
  • Click on "+that" (Colored blue in the phrase "if this then that")
  • Look for "BOND" and select it.
  • Select "Turn on the device".
  • Select which Device you wanted to perform the action.
  • Click on Create action.
  • Click on Finish.

(3) Turning Off Device in IFTTT  

  • Click on your account in the upper right hand section of the page. 
  • Click on "+this" (Colored blue in the phrase "if this then that")
  • Look for "Date & Time" and select it.
  • Fill in the desired time and duration (00 Minutes if no timer), Click on create trigger.
  • Click on "+that" (Colored blue in the phrase "if this then that")
  • Look for "BOND" and select it.
  • Select "Turn off the device".
  • Select which Device you wanted to perform the action.
  • Click on Create action.
  • Click on Finish.

(4) Run Simple Action 

  • Click on your account in the upper right hand section of the page. 
  • Click on "+this" (Colored blue in the phrase "if this then that")
  • Look for "Date & Time" and select it.
  • Click on "+that" (Colored blue in the phrase "if this then that")
  • Look for "BOND" and select it.
  • Select "Run Simple action".
  • Select the device with the corresponding action. (Turn on / OFF)
  • Click on Create action.

 

Was this article helpful?
9 out of 10 found this helpful
Have more questions? Submit a request

Comments

3 comments
  • Is there anyway to select a specific sensor connected to your ecobee? I have several sensors throughout the house with a fan in one of them. If the location with the fan reaches a certain temperature I would like to fan to kick on for that room.

  • Please add ifttt examples of setting fan speed or setting fanlight brightness.

  • Agree with Alan, would be great for some ifttt examples for fan speed please

Please sign in to leave a comment.