(Bond Bridge) How to connect to a new WiFI network using the Green (WiFi) Reset


This reset is used when you want to connect the BOND unit to a different WiFi network without deleting your devices.  This reset is also used if you were not able to connect to your wifi network (entered wrong password) and need to start the connection process again.

  • Use a small pointy object such as a toothpick to press and hold the reset switch located in a small hole next to the USB cable connector. Hold it down until the ring turns green (about 5 seconds) and then release.  The ring will blink white for several seconds and finally return to a flashing green.

  • Open the BOND application and select the + sign to add a new BOND.  None of your current device settings will be changed or removed.
  • Follow the BOND setup instructions.

Once you have joined the BOND to the new network you are ready to use your BOND.



Was this article helpful?
7 out of 26 found this helpful
Have more questions? Submit a request



Article is closed for comments.